Cathode lock: the general cathode lock for the power to open the door type (such as: electronic control lock). Applicable one-way open the door. Install the cathode lock must be equipped with UPS power supply. Because the power lock when the lock is locked. Anodic lock: Anode lock is the power to open the door type, (such as: electric lock) meet the fire requirements. It is installed in the upper part of the door frame. And the electromagnetic lock is different from the anode lock for two-way wooden doors, glass doors, fire doors, and it itself with a door detector, can be detected at any time the safety of the door.
The working principle of the cathode lock is similar to that of the anode lock (electric lock). Cathode lock and anode lock compared to the use of a smaller range of cathode locks, usually used for the installation of ordinary doors, through the cathode lock the door will be locked wooden door lock to lock the door function. Cathode lock is a accessory system accessory products, under normal circumstances installed in the door frame, used to lock the mechanical latch. ; Cathode lock can be widely used in office buildings, wooden doors, stainless steel doors, fire doors, residential entrance door, with the anode mechanical lock or spherical lock supporting the use. The general cathode lock for the power to open the door type. Applicable unidirectional wooden doors. Installation of the cathode lock recommended to be equipped with UPS power supply. Because the power lock when the lock is locked.
Cathode lock with embedded installation, beautiful appearance. Electromagnetic part of the use of high-quality magnetic materials and special treatment, can work for a long time without remanufacturing, to ensure the normal work and use. Cathode lock support 90 ° open door does not support 180 ° open the door, the cathode lock with high hardness stainless steel tab, bear the impact pressure: 250KG.